Single channel DC motor controller. Continuous current per channel 30 A (momentary 80 A). Supply voltage from 5 V to 30 V.
Click to enlarge
DC motor or LED strip driver, controlled via PWM interface. The driver allows you to adjust the speed of the motor or the brightness of the LED strip through the microcontroller's PWM interface or UART via the USB port, as well as manually using a potentiometer.
24V/10A PWM/USB motor controller - DFRobot DRI0050 €13.84
Back to products
Two channel DC motor driver with supply voltage from 7 V to 30 V. Continuous current consumption per channel is 10 A, and momentary 30 A. When the controller is switched on, an automatic calibration takes place. In addition, the controller module is equipped with manual buttons that allow quick testing of the system. The information about what state is on the motor output is indicated by LEDs. The controller is also equipped with protections protecting the module from delivering too high voltage.
Cytron MDDRC10 - two-channel driver for DC 10A 7V-30V motors €61.35

Cytron MD30C – single-channel 30V / 30A motor controller

€56.25

Single channel DC motor controller. Continuous current per channel 30 A (momentary 80 A). Supply voltage from 5 V to 30 V.

Add to compare
Add to wishlist
SKU: enbotdrivmot49 Categories: ,
Additional information
Product code

CTN-12402
Dimensions[mm]

94 x 79 mm
Ean

5904422341008
Shipping & Delivery

Related products

Digital caliper made by Yato with a measuring range from 0 to 150 mm and accuracy +/- 0,02 mm. Packed in a plastic case.
Add to compare

Electronic caliper Yato YT-7201 150mm + case

€24.00
Digital caliper made by Yato with a measuring range from 0 to 150 mm and accuracy +/- 0,02 mm. Packed in a plastic case.
Add to wishlist
Add to cart
Quick view
Add to compare

Resistance, capacity and inductance meter UNI-T UT603 RLC

,
€57.00
Multimeterallows to measureresistance to 200 MΩ , capacitance to 600 µF and inductance to 200 H.
Add to wishlist
Add to cart
Quick view
Tape measure with ergonomic design made of plastic. Length of 3 m and a width of 16 mm.
Add to compare

Tape measure Vorel 10104 – 3m

€2.40
Tape measure with ergonomic design made of plastic. Length of 3 m and a width of 16 mm.
Add to wishlist
Add to cart
Quick view
True RMS multimeter with automatic adjustment of the range, allowsto measure the voltage of DC and AC up to 600 V, the voltage of the flow of DC and AC current to 10 A, resistance, capacitance and frequency
Add to compare

Universal meter UNI-T UT139C

€64.00
True RMS multimeter with automatic adjustment of the range, allowsto measure the voltage of DC and AC up to 600 V, the voltage of the flow of DC and AC current to 10 A, resistance, capacitance and frequency
Add to wishlist
Add to cart
Quick view
A small meter with which we can make simple electrical and electronic measurements. With RB-838 Rebel meter it is possible to measure DC and AC voltage, DC current, resistance and temperature.
Add to compare

Universal Multimeter Rebel RB-838

,
€6.40
A small meter with which we can make simple electrical and electronic measurements. With RB-838 Rebel meter it is possible to measure DC and AC voltage, DC current, resistance and temperature.
Add to wishlist
Add to cart
Quick view
Multimeter kann Spannung DC und AC bis zu 1 kV, den Verbrauch von Gleichstrom bis 20 Ampere, Widerstand und Temperatur messen.
Add to compare

Universal multimeter UNI-T UT107

,
€44.25

Multimeter can measure voltage DC and AC up to 1 kV, the consumption of DC current to 20 amp, resistance and temperature.

Add to wishlist
Add to cart
Quick view
Das Universalmessgerät UT33B + ermöglicht die Messung von Gleich- und Wechselspannung bis zu 600 V und Gleichstrom bis zu 10 A.
Add to compare

Universal multimeter Uni-T UT33B+

,
€17.85
Universal meter UT33B+ allows for measuring DC and AC voltage up to600 Vand DC current up to 10 A.
Add to wishlist
Add to cart
Quick view
The UNI-T multimeter allows to define DC and AC parameters and to perform NCV (electric field detection) measurements.
Add to compare

Universal multimeter UNI-T UT33D+

,
€16.00
The UNI-T multimeter allows to define DC and AC parameters and to perform NCV (electric field detection) measurements.
Add to wishlist
Add to cart
Quick view