Motoron M2H18v20 - a two-channel motor driver designed by Pololu in the form of an overlay for Raspberry Pi minicomputers. It is equipped with a 40-pin connector to which you can connect other Raspberry Pi caps.
Click to enlarge
Module with dual-channel driver of motors TB9051FTG working with voltages from 4.5 V to 28 V and current up to 2,6 A per channel (max 5 A). The system can be connected directly with connectors GPIO of minicomputer Raspberry Pi B+, 2, 3 and 3+.
TB9051FTG Hat two-channel driver for motors 28V / 2.6A - shield for Raspberry Pi - complex - Pololu 2762 €56.85
Back to products
Two-channel Motoron M2H18v18 motor driver designed by Pololu in the form of an overlay for Raspberry Pi minicomputers. The module has a 40-pin connector to which you can connect other Raspberry Pi caps. The product communicates with the minicomputer via the I2C interface, so only two GPIO pins are needed to start working. The shield allows you to control two motors with a supply voltage from 6.5 V to 30 V and a current of up to 18 A.
Motoron M2H18v18 dual channel motor controller - 30V/18A - overlay for Raspberry Pi - assembled - Pololu 5048 €106.26

Motoron M2H18v20 dual channel motor controller – 30V/20A – overlay for Raspberry Pi – assembled – Pololu 5054

€205.66

Motoron M2H18v20 – a two-channel motor driver designed by Pololu in the form of an overlay for Raspberry Pi minicomputers. It is equipped with a 40-pin connector to which you can connect other Raspberry Pi caps.

Add to compare
Add to wishlist
SKU: enbotdrivmot140 Categories: ,
Additional information
Product code

PLL-21981
Shipping & Delivery

Related products

Штангенциркуль из нержавеющей стали фирмы Vorel с диапазоном измерения от 0 до 150 мм и точностью ±0,2 мм. Упакован в пластиковый футляр.
Add to compare

Calipers Vorel 15110 + case – 0-150mm

€9.60
Stainless steel calliper by Vorel with measuring range from 0 to 150 mm and accuracy +/- 0.2 mm. Packaged in plastic case.
Add to wishlist
Add to cart
Quick view
Электронный измеритель DT-5300B производства CEM предназначен для измерения сопротивления заземления, используемого в электрических установках и установках молниезащиты, а также для измерения удельного сопротивления грунта. DT-5300B позволяет компенсировать влияние сопротивления кабеля, регулируя нулевую точку с помощью потенциометра ADJ. Измеритель оснащен встроенным вольтметром постоянного тока напряжением до 1000 В, переменного тока напряжением до 750 В, омметром> как в мультиметре (низкого напряжения) для измерения низкого сопротивления, так и в акустическом тестере целостности электрической цепи. Кроме того, устройство оснащено жидкокристаллическим дисплеем с подсветкой. Весь комплект помещен в сумку из материала, обеспечивающего удобство переноски.
Add to compare

Grounding resistance meter CEM DT-5300B

,
€157.00
The CEM DT-5300B electronic meter measures earth resistance, soil resistivity, and includes a DC and AC voltmeter, ohmmeter, and continuity tester. It compensates for cable resistance and features a backlit LCD display, all in a portable material bag.
Add to wishlist
Add to cart
Quick view
Точное измерение активного сопротивления и емкости. Позволяет измерять сопротивление до 200 мкм и конденсаторы емкостью 20 мкФ. В устройстве также есть тестер транзисторов, диодов и аудиосигнал.
Add to compare

Resistance and capacity meter UNI-T UT601

,
€46.35
Accurate measurement of active resistance and capacitance. It allows you to measure resistance up to 200 MΩand capacitors20 UF. The device also has a transistor tester, a diode and an audio signal.
Add to wishlist
Add to cart
Quick view
Orangjo universal digital meter designed to perform basic measurements of DC voltage, AC voltage, DC current and resistance.
Add to compare

Universal meter Orangjo VC504

€11.20
Orangjo universal digital meter designed to perform basic measurements of DC voltage, AC voltage, DC current and resistance.
Add to wishlist
Add to cart
Quick view
A small meter with which we can make simple electrical and electronic measurements. With RB-838 Rebel meter it is possible to measure DC and AC voltage, DC current, resistance and temperature.
Add to compare

Universal Multimeter Rebel RB-838

€6.40
A small meter with which we can make simple electrical and electronic measurements. With RB-838 Rebel meter it is possible to measure DC and AC voltage, DC current, resistance and temperature.
Add to wishlist
Add to cart
Quick view
Multimeter kann Spannung DC und AC bis zu 1 kV, den Verbrauch von Gleichstrom bis 20 Ampere, Widerstand und Temperatur messen.
Add to compare

Universal multimeter UNI-T UT107

,
€44.25

Multimeter can measure voltage DC and AC up to 1 kV, the consumption of DC current to 20 amp, resistance and temperature.

Add to wishlist
Add to cart
Quick view
The multimeter enables to measure DC voltage up to 1 kV AC to 750 V, DC and AC current to 20A, resistance, andcapacitance.
Add to compare

Universal Multimeter UNI-T UT58A

€44.50

The multimeter enables to measure DC voltage up to 1 kV AC to 750 V, DC and AC current to 20A, resistance, andcapacitance.

Add to wishlist
Add to cart
Quick view
Multimeter can measure voltage DC and AC up to 500 V, the consumption current up to 10 A, resistance up to 40 mω.
Add to compare

Universal Multimeter Velleman DVM855

,
€33.00

Multimeter can measure voltage DC and AC up to 500 V, the consumption current up to 10 A, resistance up to 40 mω.

Add to wishlist
Add to cart
Quick view