Showing 1–12 of 306 results

Show sidebar
Show 9 24 36
Shield for Raspberry based on DS2482-100 system which allows you to use the 1-Wire protocol. The module provides a conversion of the I2C interface. It has built-in a RJ12 connector, electrostatic protection and the possibility of a separate supply

1 Wire Pi Plus DS2482 – 1-Wire module for Raspberry Pi

€29.85
Shield for Raspberry based on DS2482-100 system which allows you to use the 1-Wire protocol. The module provides a conversion of the I2C interface. It has built-in a RJ12 connector, electrostatic protection and the possibility of a separate supply
Add to wishlist
Add to cart
Quick view
Shield for Raspberry, based on DS2482-100 system, allows you to use the 1-Wire protocol. The module provides conversion to the I2C interface. It has built-in RJ12 connector, electrostatic protection and the possibility of a separate power supply.

1 Wire Pi Zero DS2482 – 1-Wire module for Raspberry Pi

€27.75
Shield for Raspberry, based on DS2482-100 system, allows you to use the 1-Wire protocol. The module provides conversion to the I2C interface. It has built-in RJ12 connector, electrostatic protection and the possibility of a separate power supply.
Add to wishlist
Add to cart
Quick view
An extension to the Raspberry Pi Pico from Waveshare in the form of a 10 DoF IMU sensor. It can be used to collect environmental data including temperature or barometric pressure. The module is based on ICM20948 and LPS22HB chips, which include an accelerometer, gyroscope, magnetometer and barometer. The resolution of the measurements is 16 bits.

10 DoF IMU sensor – module with accelerometer, gyroscope and barometer – for Raspberry Pi Pico – Waveshare 19358

€37.50
An extension to the Raspberry Pi Pico from Waveshare in the form of a 10 DoF IMU sensor. It can be used to collect environmental data including temperature or barometric pressure. The module is based on ICM20948 and LPS22HB chips, which include an accelerometer, gyroscope, magnetometer and barometer. The resolution of the measurements is 16 bits.
Add to wishlist
Add to cart
Quick view
Foresee eMMC module for minicomputers ROCKPro64. It has a capacity of 16 GB.

16GB eMMC Foresee module for ROCKPro64

€41.85
Foresee eMMC module for minicomputers ROCKPro64. It has a capacity of 16 GB.
Add to wishlist
Add to cart
Quick view
A module manufactured by Waveshare as a 2 channel UART - RS485 communication converter . Dedicated for use with Raspberry Pi Pico, it has pinouts compatible with Raspberry Pi Pico connectors. The data rate ranges from 300 bps to 500000 bps.

2-Channel RS485 – 2-channel UART-RS485 SP3485 module – for Raspberry Pi Pico – Waveshare 19717

€10.40
A module manufactured by Waveshare as a 2 channel UART - RS485 communication converter . Dedicated for use with Raspberry Pi Pico, it has pinouts compatible with Raspberry Pi Pico connectors. The data rate ranges from 300 bps to 500000 bps.
Add to wishlist
Add to cart
Quick view
Overlay for Raspberry Pi Pico with 2.13'' flexible e-paper display with 212 x 104 px resolution. It communicates via SPI interface. Supports partial refresh. Compared to normal e-paper displays, this flexible display allows you to create projects that go beyond the standard functionality offered by classic LCD, OLED or e-paper displays.

2.13inch Flexible E-Paper E-Ink Display Module for Raspberry Pi Pico, 212×104, Black / White, SPI

€34.35
Overlay for Raspberry Pi Pico with 2.13'' flexible e-paper display with 212 x 104 px resolution. It communicates via SPI interface. Supports partial refresh. Compared to normal e-paper displays, this flexible display allows you to create projects that go beyond the standard functionality offered by classic LCD, OLED or e-paper displays.
Add to wishlist
Add to cart
Quick view
A module manufactured by Kitronik in the form of a motor and servo controller. The Kitronik Robotics Board allows you to control four DC motors (or two stepper motors) and eight servos. In addition, it also has 27 IO leads with which you can extend the functionality of the Raspberry Pi Pico. The maximum current consumption per motor is 1.5 A, and the maximum continuous current for all connected servos and motors should not exceed 12 A.

3-10.8V motor controller – dual channel – for Raspberry Pi Pico – Kitronik 5331

€34.35
A module manufactured by Kitronik in the form of a motor and servo controller. The Kitronik Robotics Board allows you to control four DC motors (or two stepper motors) and eight servos. In addition, it also has 27 IO leads with which you can extend the functionality of the Raspberry Pi Pico. The maximum current consumption per motor is 1.5 A, and the maximum continuous current for all connected servos and motors should not exceed 12 A.
Add to wishlist
Add to cart
Quick view
Foresee eMMC module for minicomputers ROCKPro64. It has a capacity of 32 GB.

32GB eMMC Foresee module for ROCKPro64

€62.25
Foresee eMMC module for minicomputers ROCKPro64. It has a capacity of 32 GB.
Add to wishlist
Add to cart
Quick view
Module with 8-segment display allowing to display 4 digits and some red letters. It is based on 74HC595 chip which allows communication via SPI interface. Module is powered by 5V directly from Raspberry Pi Pico board.

4x 8-segment display module – red- SPI – for Raspberry Pi Pico – Waveshare 19806

€6.24
Module with 8-segment display allowing to display 4 digits and some red letters. It is based on 74HC595 chip which allows communication via SPI interface. Module is powered by 5V directly from Raspberry Pi Pico board.
Add to wishlist
Add to cart
Quick view
The module is equipped with AVR Atmega32u4 microcontroller with installed bootloader compatible with the environment of Arduino. It is equipped with 26 digital inputs/outputs, as well as the popular communication interfaces. The supply voltage ranges from 5 V to 40 V.

A-Star 32U4 Mini SV – Atmega32u4 module – Pololu 3145

€42.75
The module is equipped with AVR Atmega32u4 microcontroller with installed bootloader compatible with the environment of Arduino. It is equipped with 26 digital inputs/outputs, as well as the popular communication interfaces. The supply voltage ranges from 5 V to 40 V.
Add to wishlist
Add to cart
Quick view
Acrylic case for Nvidia Jetson Nano - transparent - Waveshare 16566

Acrylic case for Nvidia Jetson Nano – transparent – Waveshare 16566

€7.84
Acrylic case for Nvidia Jetson Nano - transparent - Waveshare 16566
Add to wishlist
Add to cart
Quick view
Board based on ATtiny817 chip clocked at 20 MHz with 8 kB of flash memory and 512 B of RAM. It is also a seesaw Adafruit module, an I2C converter that allows you to extend another microcontroller module or minicomputer with additional interfaces over the I2C line. There are also two Qwiic / STEMMA QT connectors on the board for easy connection to a board with the same connector with I2C interface.

Adafruit ATtiny817 seesaw – STEMMA QT / Qwiic – Arduino compatible – Adafruit 5233

€11.04
Board based on ATtiny817 chip clocked at 20 MHz with 8 kB of flash memory and 512 B of RAM. It is also a seesaw Adafruit module, an I2C converter that allows you to extend another microcontroller module or minicomputer with additional interfaces over the I2C line. There are also two Qwiic / STEMMA QT connectors on the board for easy connection to a board with the same connector with I2C interface.
Add to wishlist
Add to cart
Quick view