Showing 1–12 of 76 results

Show sidebar
Show 9 24 36
Digital module with optical sensor with a slit of 2 mm. The output is a digital signal. The supply voltage is 5 V. With the encoder's shield, it can be used as a device counting the pulses, etc

2mm slit sensor – Iduino SE056

€2.29
Digital module with optical sensor with a slit of 2 mm. The output is a digital signal. The supply voltage is 5 V. With the encoder's shield, it can be used as a device counting the pulses, etc
Add to wishlist
Add to cart
Quick view

CNY70 reflective optocoupler sensor

€1.44
Reflective optocoupler used, for example, to distinguish the edges or for line detection. Case dimensions - 7 x 7 x 6 mm,through hole installation.
Add to wishlist
Add to cart
Quick view
Compact strap with eight reflective sensors. It has the function of automatic calibration, LCD display of 2x8, digital and analog outputs, UART, powered with a voltage of 12 V.

Cytron LSA08 – strip with reflection sensors and display

€71.26
Compact strap with eight reflective sensors. It has the function of automatic calibration, LCD display of 2x8, digital and analog outputs, UART, powered with a voltage of 12 V.
Add to wishlist
Add to cart
Quick view
The Cytron module equipped with 5 reflective sensors (pair: IR diode and phototransistor) isable to track 13 to 30 mm wide lines in white and black. The sensor has 2 types of signal outputs, digital, for each of the 5 sensors separate and one common for the analogue signal.

Cytron Maker Line -Trim with reflective sensors

€17.25
The Cytron module equipped with 5 reflective sensors (pair: IR diode and phototransistor) isable to track 13 to 30 mm wide lines in white and black. The sensor has 2 types of signal outputs, digital, for each of the 5 sensors separate and one common for the analogue signal.
Add to wishlist
Add to cart
Quick view
Maker Reflect is a small reflective sensor equipped with an IR diode that sends out an infrared light beam, which returns to the sensor after reflection from the surface and the built-in phototransistor measures its intensity. The sensor can be used to build a line tracing or minisumo robot.

Cytron Maker Reflect – Analog IR reflectance sensor

€4.00
Maker Reflect is a small reflective sensor equipped with an IR diode that sends out an infrared light beam, which returns to the sensor after reflection from the surface and the built-in phototransistor measures its intensity. The sensor can be used to build a line tracing or minisumo robot.
Add to wishlist
Add to cart
Quick view
Digital sensor of tracking the line, reflective for Arduino, it can detect the white and black lines. Separate signals provides a stable output signal TTL, so it looks for more accurate and more stable line.

DFRobot Gravity – line tracking sensor – reflective, digital

€9.44
Digital sensor of tracking the line, reflective for Arduino, it can detect the white and black lines. Separate signals provides a stable output signal TTL, so it looks for more accurate and more stable line.
Add to wishlist
Add to cart
Quick view
Optical reflective distance sensor detecting the object in the range from 0.01 cm to 15.2 cm. It has a digital output type - open collector, which changes the logic status when it detects the obstacle. The sensor works with a voltage from 10 V to 30 V,it has a cable with the length of approx. 1.m.

Digital distance sensor OPB720A-06Z with 30V – 15cm cable

€34.35
Optical reflective distance sensor detecting the object in the range from 0.01 cm to 15.2 cm. It has a digital output type - open collector, which changes the logic status when it detects the obstacle. The sensor works with a voltage from 10 V to 30 V,it has a cable with the length of approx. 1.m.
Add to wishlist
Add to cart
Quick view
The reflective module with a transmitter and an infrared receiver, equipped with a digital output. It works with a voltage from 3.3 V to 5 V. It enables the detection of obstacles in the range from 2 to approx. 40 cm. Based on NE555 chip.

Distance sensor, reflective – receiver + transmiter IR – 3.3V / 5V – 40cm – Iduino ST1081

€4.00
The reflective module with a transmitter and an infrared receiver, equipped with a digital output. It works with a voltage from 3.3 V to 5 V. It enables the detection of obstacles in the range from 2 to approx. 40 cm. Based on NE555 chip.
Add to wishlist
Add to cart
Quick view
The reflective module with IR sensor equipped with digital and analog output. It works with a voltage from 3 V to 5.3 V. It enbales the detection of obstacles in the range from 0 to 30 mm.

Distance sensor, reflective 3,3V/5V – 30mm – Waveshare 9523

€6.24
The reflective module with IR sensor equipped with digital and analog output. It works with a voltage from 3 V to 5.3 V. It enbales the detection of obstacles in the range from 0 to 30 mm.
Add to wishlist
Add to cart
Quick view
The module is equipped with IR reflective sensor equipped with digital output. It works with a supply voltage from 3.3 V to 5 V. It is applied in the robots tracking the line

Distance sensor, reflective 3,3V/5V – Iduino ST1140

€3.04
The module is equipped with IR reflective sensor equipped with digital output. It works with a supply voltage from 3.3 V to 5 V. It is applied in the robots tracking the line
Add to wishlist
Add to cart
Quick view
Module from the Grove series is based on a reflective sensor ITR9909. It consists of LED emitting the infrared light and phototransistor of high sensitivity. It is supplied with the voltage of 5 V. The range is from 75 to 400 mm. It has a digital output, making it compatible with most commissioning modules, including Raspberry Pi and Arduino.

Grove – ITR9909 reflectance sensor v1.2

€10.11
Module from the Grove series is based on a reflective sensor ITR9909. It consists of LED emitting the infrared light and phototransistor of high sensitivity. It is supplied with the voltage of 5 V. The range is from 75 to 400 mm. It has a digital output, making it compatible with most commissioning modules, including Raspberry Pi and Arduino.
Add to wishlist
Add to cart
Quick view
Module from the Grove series is based on a reflective sensor RPR-220. It consists of LED emitting the infrared light and phototransistor of high sensitivity. It is supplied with the voltage of 5 V. The range is from 0 to 45 mm.

Grove – RPR-220 reflectance sensor v1.2

€9.44
Module from the Grove series is based on a reflective sensor RPR-220. It consists of LED emitting the infrared light and phototransistor of high sensitivity. It is supplied with the voltage of 5 V. The range is from 0 to 45 mm.
Add to wishlist
Add to cart
Quick view